4 Replacement Procedures 4.12 Wireless LAN card
4-38 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
Installing the Wireless LAN card
To install the wireless LAN card, follow the steps below and refer to Figure 4-22.
1. Insert the wireless LAN card to the connector on the system board slantwise and press
it to connect firmly.
2. Push down the wireless LAN card and secure it with the following screws.
• M2.0×4B BIND ×2
3. Connect the wireless LAN antenna cables to the connectors (white cable to Main and
black cable to Aux) on the wireless LAN card.
To Next Page
Loading...
