Toshiba TECRA A10 - Page 293

4.21 System board 4 Replacement Procedures
l
• M2.5×6C Tapping screw ×4
4. Remove the ODD FPC from the connector CN1950 on the back of the system board.
(15.4-inch model only)
Glass tape
M2.5x6C Tapping
DC-IN jack
CN9530
M2.5x6C Tapping
M2.5x6C Tapping
CN1950
ODD FPC
Sound board FFC
Figure 4-37 Removing the system board
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-61