Toshiba TECRA A10 - Page 297

4.22 GFX board/GFX fin 4 Replacement Procedures
2. Remove the following screws and separate the GFX fin and GFX board.
• M2.0×3C S-THIN HEAD screw ×4
GFX board
GFX fin
M2.0x3C S-THIN HEAD
M2.0x3C S-THIN HEAD
Cool sheet
Figure 4-40 Removing the GFX board/GFX fin (2)
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-65