Toshiba TECRA A10 - Page 352

4 Replacement Procedures 4.36 Fluorescent Lamp
4.36.2 Replacing the 15.4-inch WXGA Samsung Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel and backlight unit.
Removing the fluorescent lamp
To replace the 15.4-inch WXGA Samsung fluorescent lamp, follow the steps below and refer
to figures 4-77 to 4-80.
1. Remove the PCB cover.
CAUTION: Handle with care not to damage COF of S/D.
4-120 [CONFIDENTIAL] TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684)
PCB cover
Figure 4-77 Replacing 15.4-inch Samsung fluorescent lamp (WXGA) (1)