Toshiba TOSDIC-CIE DS User Manual

2. Installation and Wiring
9
 Keep away from high voltage lines and power lines.
 Considering ease of maintenance and safety of operation, keep away from high voltage
devices and power lines, or, if this is impossible, separate the system from these other
devices, for example by an iron plate.
 Do not mount a terminal block unit horizontally, since this obstructs ventilation.
To increase the mouting stability, fix the DIN
rail in place with screws approximately in the
center of the unit to which it is attached.
(If the terminal block is mounted flush, the
interval becomes about 240 mm.)
Unit mounting position
DIN rail
External
wire
(with short bar attached)
52 mm 48 mm or more
Figure 2.1 How to mount a terminal block unit

Toshiba TOSDIC-CIE DS Specifications

General

Brand	Toshiba
Model	TOSDIC-CIE DS
Category	Control Systems
Language	English