Toshiba TSL3000 - Page 19

STE 80722
– 14 –
COMMUNICATION MANUAL
series Robot Controller
[E10] TCP status alarm IP0 IP1 IP2 IP3
[E10] TCP status alarm IP0 IP1 IP2 IP3
{0:NON 1:Lv_1 2:Lv_2 4:LV_4 8:Lv_8}
= 0 0 0 0
For the port being used, the alarm level (1Lv, 2Lv, 4Lv, 8Lv) generated when the
Ethernet connection is cut off during running of a program can be set.
When the value is 0 (zero), no alarm is generated.