Toshiba VF-PS1 - Page 268

K-26
E6581386
11
[26] Communication function [3/4] Sensorless vector/vector with sensor (●:Effective, -:Ineffective)
Title
Communi
cation
No.
Function Adjustment range
Minimum
setting unit
(Panel/Communi
cation)
Default
setting
Write during
running
Vector
control
PM
control
V/f Constant
Reference
 0845
Communication option (DeviceNet/ PROFIBUS) setting 12
0000~ 1/1 0000 Enabled ●/●●● *1
 0846
Communication option (DeviceNet/ PROFIBUS) setting 13
0000~ 1/1 0000 Enabled ●/●●● *1
 0850 Disconnection detection extended time 0.0~100.0 sec. 0.1/0.1 0.0 Enabled ●/●●● *1  0851 Inverter operation at disconnection
0:Inverter stop, communication command,
frequency mode open (by , )
1:None (continued operation) 2:Deceleration stop 3:Coast stop 4:Network error ( trip) 5:Preset speed operation (by  setting)
1/1 0 Enabled ●/●●● *1
 0852 Preset speed operation selection
0:None 1~15:Preset speed operation (by parameter
setting)
1/1 0 Enabled ●/●●● *1
 0853
Communication option station address monitor
0~255 1/1 0 Enabled ●/●●● *2
 0854
Communication option speed switch monitor DeviceNet/CC-Link
0~255 1/1 0 Enabled ●/●●● *2

0856 Number of motor poles for communication
1:2 poles 2:4 poles 3:6 poles 4:8 poles 5:10 poles 6:12 poles 7:14 poles
8:16 poles
1/1 2 Enabled ●/●●● *2
*1: ⇒ For details, refer to Instruction Manual (E6581281, E6581343) specified in Section 6.36. *2: ⇒ For details, refer to Instruction Manual (E6581281, E6581343, E6581288) specified in Section 6.36.