Toshiba VF-PS1 - Page 277

35
K-35
E6581386
11
[Monitor FM/AM/pulse output function selection (2/2)] Sensorless vector/vector with sensor (●: valid, -: invalid)
FM/AM/pulse output Monitor output
Option No.
Communicati
on No.
Option No.
Communicati
on No.
Function
Unit
(Communicat
ion)
Trip retention
Vector
control
PM control V/f Reference
--33FE67
Attached to expansion I/O card 2 CPU version
-×●/●● ●
34 FE76 34 FE76 Integral input power
Depends on

× ●/●● ●
35 FE77 35 FE77 Integral output power
Depends on

× ●/●● ●
45
0006 *3 0671 *4
- - Gain display 1 - ●/●● ●
46 FE60 - -
My function monitor 1 (Output of unsigned value)
1×●/●● ●
47 FE61 - -
My function monitor 2 (Output of unsigned value)
1×●/●● ●
48 FE62 - -
My function monitor 3 (Output of signed value) *2
1×●/●● ●
49 FE63 - -
My function monitor 4 (Output of signed value) *2
1×●/●● ●
50 FD00 50 FE00 Signed output frequency *5 0.01Hz
○
●/●● ●
51 FD02 51 FE02 Signed frequency command value *5 0.01Hz
○
●/●● ●
52 FD15 52 FE15 Signed compensated frequency *5 0.01Hz
○
●/●● ●
53 FD16 53 FE16
Signed speed feedback (real-time value)*5
0.01Hz
○
-/● --
54 FD17 54 FE17
Signed speed feedback (1-second filter) *5
0.01Hz
○
-/● --
55 FD18 55 FE18 Signed torque *5 0.01%
○
●/●●●*1
56 FD19 56 FE19 Signed torque command *5 0.01%
○
---
58 FD20 58 FE20 Signed torque current 0.01%
○
●/● - ● *1
59 FD22 59 FE22 Signed PID feedback value *5 0.01
○
●/●● ●
60 FE37 60 FE37 Signed RX input *5 0.01% × ●/●● ● 61 FE38 61 FE38 Signed optional AI1 input *5 0.01% × ●/●● ● 62 FE51 - - Signed fixed output 1 - × ●/●● ● 63 FE50 - - Signed fixed output 2 - × ●/●● ● 64 FE52 - - Signed fixed output 3 - × ●/●● ●
- - 71 FE90 Output speed 1min
-1
× ●/●● ●
- - 72 FA15
Communication option Reception counter
1×●/●● ●
- - 73 FA16
Communication option Error counter
1×●/●● ●
5.16
8.3
*1: Reference data *2: An absolute value is output for pulse train output of 48 and 49. *3: Communication no. for FM output *4: Communication no. for AM output *5: If a negative value is specified, the negative sign “-” is displayed. The negative sign “-” is affixed only to values displayed on the monitor. Keep in mind that no sign is affixed to any values read
through a communications device.
⇒ For details, refer to Section 5.16; [Terminal FM-related parameters]. ⇒ For monitor indications, refer to Section 8.3; [Set up values of monitor indication parameters].