Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
3˅ Choose an option to your need. Enter the MAC address if “Use Custom MAC
Address” is selected.
4˅ Click Save.
Solution 3: Modify the LAN IP address of the router.
Note: Most TP-LINK routers use 192.168.1.1/192.168.0.1 as their default LAN IP
address, it may be conflicting with the IP range of your existent ADSL
modem/router. If so, the router is not able to communicate with your modem and
cause you can’t access the Internet. To resolve the problem, we need to change
the LAN IP address of the router to avoid such conflict, for example,
192.168.2.1.
1˅ Visit http://tplinkwifi.net
, and log in with the username and password you set
for the router.
2˅ Click Advanced > Network >LAN to enter the configuration page;
3˅ Modify the LAN IP address as Figure 13 shows. Here we take 192.168.2.1 as
an example;
4˅ Click Save.
Solution 4˖
Power Cycle the modem and the TP-LINK router.
1˅ Power off your modem and TP-LINK router, leave them off for 1 minute;
Power on your modem first, wait about 2 minutes until it get a solid cable or
Internet light;
- 101 -
To Next Page
Loading...
