Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
z Change a web browser or PC and login again.
z Reset the router to factory default settings.
Press and hold the RESET button for about 8 seconds and then release.
Tip: You’ll need to reconfigure the router to surf the Internet once the router is
reset.
Open a web browser and login again. If login fails, please contact the technical
support.
Completed! Now you can login to the router’s web management page and manage your
router.
Q4. How to use the WDS Bridging function to extend my wireless
network?
For example: My house covers a large area. The wireless network coverage of the router I’m
using (the root router) is limited. I want to use an extended router to extend the wireless network of
the root router.
Tip: (1) WDS bridging only requires configuration on the extended router;
- 94 -
To Next Page
Loading...
