Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
For example:
Note:
9 DDNS does not work if the ISP assigns a private WAN IP address
(such as 192.168.0.x) to the router.
9 To use this function, you have to have a NO-IP account or a
Dyndns account.
How can I
do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for
the router.
2. Go to Advanced>Network>Dynamic DNS.
3. Select a DDNS service provider (NO-IP or Dyndns).
Note: If you don’t have a DDNS account, select a service provider
and click Go to register to register.
4. Enter the username, password and domain name of the account
(such as lisadns.ddns.net).
5. Click Login and Save.
Completed!
Now on the PC that can manage the router remotely, log in to
http://domain name:port number (such as lisa.ddns.net:1024) to
manage the router.
13.4 Interface Grouping
I want to:
Divide my devices connected to the router into different groups and disallow
- 76 -
To Next Page
Loading...
