Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
Website in Local Network to the Internet -> Method 1 Through Virtual
Server ->Mode 2 Manual Configuration”.
5. Click OK.
Method 2 Through DMZ
Tip: If you are not sure which specific port to open, you can use DMZ. When
DMZ is enabled, the DMZ host is exposed to the Internet, which may bring some
potential safety hazard. If DMZ is not in use, please disable it in time.
1. Verify the PC’s IP address. For example, 192.168.0.100.
Tip: It is recommended to assign a static IP to your PC.
2. Visit http://tplinkwifi.net
, and log in with the username and password you set
for the router.
3. Click Advanced ->NAT Forwarding -> DMZ to open the DMZ configuration
page.
4. Select the Enable DMZ checkbox.
5. Enter the PC’s IP address 192.168.0.100 into the DMZ Host IP Address
field.
6. Click Save to complete the configuration.
Completed!
1. If Method 1 Virtual Server is used, the Internet users can enter http:// WAN
IP: External Port (in this example: http:// 218.18.232.154: 8000) to visit your
personal website.
- 60 -
To Next Page
Loading...
