Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
Completed!
Now you can block or allow specific client devices to access your network
(wired or wireless) using the Blacklist or Whitelist.
7.3 IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to map network
device's IP address to its MAC address. This will prevent ARP Spoofing and ARP Attacks by
denying any other device other than the bound one to access the network using the bound IP
address.
I want to:
Prevent ARP Spoofing and ARP Attacks.
How can I
do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Security > IP & MAC Binding. Enable IP & MAC
Binding.
3. Use method 1 or method 2 to bind device (s).
¾ Method 1: bind the connected device(s)
1) Select the device to be bound in the ARP List.
- 31 -
To Next Page
Loading...
