Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
Note:
¾ If your Internet connection type is "Bigpond Cable", please go to
"Advanced>Network>Internet".
¾ If you use Dynamic IP and PPPoE and you are provided any other
parameters that are not required on the page, please go to
"Advanced>Network>Internet" to complete the configuration.
¾ If you still cannot connect to the Internet, refer to Appendix: FAQ for further
instructions.
Completed!
Success! Now your computer and WiFi device can connect to the Internet!
You can connect your computer to the router's LAN port using an Ethernet cable to
join the local area network. You can also find and select the wireless network
name on your WiFi device to join the WiFi network.
- 18 -
To Next Page
Loading...
