Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
How can I
do that?
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced > Security > Access Control. Enable Access Control.
3. Select the Access Mode you need and click Save.
¾ In Blacklist mode, any device (wired or wireless) added to the
Devices in Blacklist will be blocked from accessing your network. It is
recommended to select this mode if you only want to block specific
devices. For specific configurations under this mode, go to Blacklist
Mode.
¾ In Whitelist mode, only devices (wired or wireless) added to the
Devices in Whitelist will be allowed to access the network. It is
recommended to select this mode if you want to grant exclusive
access to specific devices. For specific configurations under this
mode, go to Whitelist Mode.
9 Blacklist Mode
- 29 -
To Next Page
Loading...
