150Mbps Wireless AP/Client Router User Guide
97
Figure 4-97
¾ CWMP: Select enable the CWMP function.
¾ Inform: Enable or disable the function. If enabled, the information will be informed to ACS
server periodically.
¾ Inform Interval: Enter the interval time here.
¾ ACS URL: Enter the website of ACS which is provided by your ISP.
¾ ACS User Name/Password: Enter the User Name and password to login the ACS server.
¾ Interface used by TR-069 client: Select the interface used by TR-069 client.
¾ Display SOAP messages on serial console: Enable or disable this function.
¾ Connection Request User Name/Password: Enter the User Name and Password that
provided the ACS server to login the Modem Router.
¾ Connection Request Path: Enter the path that connects to the ACS server.
¾ Connection Request Port: Enter the port that connects to the ACS server.
¾ Connection Request URL: Enter the URL that connects to the ACS server.
4.17.5 SNMP Settings
Choose “Management”Æ“SNMP Agent”, you can see the SNMP-Configuration screen as shown
below.
SNMP (Simple Network Management Protocol) has been widely applied in the computer networks
currently, which is used for ensuring the transmission of the management information between
any two nodes. In this way, network administrators can easily search and modify the information
on any node on the network. Meanwhile, they can locate faults promptly and implement the fault
diagnosis, capacity planning and report generating.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
