150Mbps Wireless AP/Client Router User Guide
65
To configure the White List, choose “Call Firewall” Æ”White List” on the left menu or click the
White List button on the screen as shown in, then you will see the screen as shown in Figure
4-52.
Figure 4-52
To add a new entry, click the Add button and you will see the screen as shown in Figure 4-53.
Figure 4-53
Enter a number with the length in the range of [3, 16] in the field of White List Number and click
the Save button to make the configuration take effect, then you will go back to the previous page
and see the following list as shown in Figure 4-52. If you want to delete the entry, check the
Remove box first and then click the Remove button.
)
Note:
Partial matching rule is applied here, so this function works for all the incoming call numbers that
start with the number you have configured in the Black List or the White List. For example, if the
number you have configured in the Black List is 555, with Black List mode enabled the incoming
call number 5554510 will be denied.
4.7.8 USB Voice Mail
Choose “Voice”Æ“USB Voice Mail“, you will see the screen as shown in Figure 4-54. USB Voice
mail is used to record voice messages when the call is not answered.
To Next Page
Loading...
