EasyManuals Logo

TP-Link TD-VG3631 User Manual

TP-Link TD-VG3631
125 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
150Mbps Wireless AP/Client Router User Guide
6
1.3.2 The Back Panel
The Router's ports, where the cables are connected, and RESET button are located on the front
Figure 1-2
¾ POWER: The Power plug is where you will connect the power adapter.
¾ USB1/USB2: The USB port connects to a USB storage device or a USB printer.
¾ PHONE2/PHONE1:The phone port connects to a phone set.
¾ LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your
PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
¾ LINE: Connect this port to PSTN phone cable. Or you can connect them by an external
separate splitter. For details, please refer to 2.3 Connecting the Router
.
¾ ADSL: Through the port, you can connect the Modem Router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to 2.3 Connecting the
Router.
¾ Antennas: Used for wireless operation and data transmit.
¾ RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from “Maintenance-SysRestart” of the Router's
Web-based Utility.
Ports and buttons on the left side

Table of Contents

Other manuals for TP-Link TD-VG3631

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TD-VG3631 and is the answer not in the manual?

TP-Link TD-VG3631 Specifications

General IconGeneral
VPN supportPPTP, L2TP, IPSec
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Input current1.5 A
Input voltage12 V
Rack mountingNo
Frequency band2.4 GHz
USB ports quantity2
Management platformHTTP/Telnet/CLI/SNMP/SSL
Filtering descriptionMAC / IP / Packet / URL
Compatible operating systemsWindows 98SE, NT, 2000, XP, Vista, 7\\r MAC OS\\r NetWare, UNIX, Linux
Ethernet LAN (RJ-45) ports4
DHCP client-
Routing protocolsRIP-1, RIP-2
Antenna connector typeRP-SMA
Antenna gain level (max)5 dBi
Security algorithms128-bit WEP, 64-bit WEP, WPA-PSK, WPA2-PSK
CertificationCE, FCC, RoHS
Storage temperature (T-T)-40 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Cables includedLAN (RJ-45), Phone (RJ-11)
Weight and Dimensions IconWeight and Dimensions
Depth177 mm
Width256 mm
Height51 mm
Weight- g

Related product manuals