150Mbps Wireless AP/Client Router User Guide
114
Appendix D: Telephone Operation
Code Description Usage
Press 0 to listen to new voice messages.
Press 1 to listen to the previous message.
Press 2 to listen to the current message again.
Press 3 to listen to the next message.
Press 4 to delete the current message.
*20
Listen to voice messages
stored in your USB
storage device.
Press 5 to listen to all the messages.
*60 Disable Call Waiting.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration
take effect.
*61 Enable Call Waiting.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration
take effect.
*62
With Call Waiting
enabled, disable it for the
call you are going to
make.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will
prompt you to dial the destination number.
*63
With Call Waiting
disabled, enable it for the
call you are going to
make.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will
prompt you to dial the destination number.
*99 Redial on busy.
Pick up the phone to dial this code. You will hear the
confirmation tone and then the dial tone which will
prompt you to dial the destination number. Hanging up
and then picking up your phone again can disable this
feature.
*70
Disable all the call
forwarding features.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration
take effect.
*71
Enable Call Forwarding
on No Answer.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration
take effect.
*72
Enable Call Forwarding
on Busy.
Pick up the phone to dial this code. After hearing the
confirmation tone, hang up to make the configuration
take effect.
To Next Page
Loading...
