150Mbps Wireless AP/Client Router User Guide
66
Figure 4-54
¾ Phone: Displays the phone that has voice message.
¾ Source: Displays the source of the voice message, i.e. the remote caller account.
¾ Dest: Displays the destination of the voice message, i.e. the local account.
¾ Start Time: Displays when the voice message starts.
¾ Length: Displays how long the voice message is.
¾ Audition: Click Play to listen to the voice message.
¾ Read Flag: Displays whether the voice message has been read or not.
¾ Selected: Check the box to select the corresponding voice message.
To refresh the web page, click Refresh button.
To delete a voice message, check the Selected box and then click Remove button.
To configure the USB Voice Mail, click Config button to enter the web page as shown in Figure
4-55.
To Next Page
Loading...
