TQ KTX2-F - ADS-B Status Indication; Figure 11: ADS-B Indication

TQ Aviation KTX2-F.0100
EASA.AP445 MAN
KTX2-F.A-MAN.0001.docx Page 27 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
2.2.7 ADS-B Status Indication
The current operational status of the ADS-B is shown on the display as follows:
Indication Function Description
ADS-B enabled.
Letter “A” appears in white
color.
ADS-
B out function is active and transmitting
messages.
ADS-B enabled.
Letter “A” appears in yellow
color.
ADS-B out function is active but not
transmitting messages.
ADS-B enabled.
Letter “A” appears in red
color.
ADS-
B out function is active and transmitting
type ZERO position messages or no position
messages due to missing position data
(longitude, altitude, latitude).
ADS-B disabled.
No letter “A” displayed.
No ADS-B data is transmitted.
Figure 11: ADS-B Indication
Note: Above images show the upper left section of the display only.