TQ Aviation KTX2-F.0100
EASA.AP445 MAN
KTX2-F.A-MAN.0001.docx Page 35 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
Figure 20: Button Illumination Mode "Off"
3.4.1.1.2 Button Illumination Mode “On”
If this mode is selected the button illumination is switched on.
To change the illumination level select “Level” and press the rotary knob. Turn the rotary knob to change
the value between 1 (dark) to 5 (bright). Press the rotary knob to save the new value.
Figure 21: Button Illumination Mode "On"
3.4.1.1.3 Button Illumination Mode “Auto”
If this mode is selected the button illumination is switched between a day and night setting depending on
the ambient light sensor.
To change the illumination level for day or night select appropriate menu item (“Day”, “Night”) and press
the rotary knob. Turn the rotary knob to change the value between 0 (off) to 5 (bright). Press the rotary
knob to save the new value.
To change the threshold level for the day/night switching select “Threshold” and press the rotary knob.
Turn the rotary knob to change the value between 1 (high light sensitivity) to 5 (low light sensitivity).
Press the rotary knob to save the new value.
To Next Page
Loading...
Need help?
General
