TQ Aviation KTX2-F.0100
EASA.AP445 MAN
KTX2-F.A-MAN.0001.docx Page 71 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
9. Maintenance
9.1 Periodic Maintenance
This transponder has been designed and manufactured to allow “on condition maintenance”. This means
that there are no periodic service requirements necessary to maintain continued airworthiness, and no
maintenance is required as long as it does properly perform its intended function. When service is
required, a complete performance test must be accomplished following any repair action. Repairs must
only be carried out in accordance with TQ-Systems GmbH service procedures.
9.2 Repair
Only exchange and flat repair of the equipment is permitted. In case of equipment malfunction, the unit
must be sent to the manufacturer. Refer to section “1.2 Customer Service”.
9.3 Cleaning
Clean the display only with, lint-free cloth and an eyeglass lens cleaner that is specified as safe for anti-
reflective coatings.
To Next Page
Loading...
Need help?
General
