TQ Aviation KTX2-F.0100
EASA.AP445 MAN
KTX2-F.A-MAN.0001.docx Page 58 of 74
© TQ-Systems GmbH. All information contained in this documents have to be treated strictly confidential. The transfer of presentations and know-how to third parties
requires the prior written consent of TQ-Systems GmbH.
4.4 Notifications
4.4.1 GNSS Data CRC Failure
Figure 46: GNSS CRC Failure
Possible Reasons:
Invalid data from GNSS source.
Actions:
Check installation, cable, connections and configuration of the installed GNSS source.
4.4.2 Do System Restart
The following message is displayed if a restart of transponder is necessary.
Figure 47: System Restart
Actions:
Switch the transponder off and on again
To Next Page
Loading...