Causes of faults and remedies
TR-Electronic GmbH 2015, All Rights Reserved Printed in the Federal Republic of Germany
Page 28 of 28 TR-ELA-BA-DGB-0025 v10 08/02/2022
5 Causes of faults and remedies
Position skips
of the measuring
system
Vibrations, impacts and shocks, e.g. on
presses, are dampened with "shock modules".
If the error recurs despite these measures, the
measuring system must be replaced.
Perhaps isolated flanges made of plastic help
against electrical faults, as well as cables with
twisted pair wires for data and supply.
Shielding and wire routing must be performed
according to the construction guidelines.
To Next Page
Loading...
