TR-ELA-KE-DGB-0071-02.docx
EU Declaration of Conformity
The Linear Measuring System Series in Explosion Proof Design
Types: LMRS-34 Ex, LP-46K
Order-No.: 346-xxxxx, 334-xxxxx
were developed, designed and manufactured to comply with the EU-Directives
Electromagnetic Compatibility (EMC)
Equipment and protective systems intended for use in
potentially explosive atmospheres (ATEX)
Restriction of the use of certain hazardous substances
in electrical and electronic equipment (RoHS)
under the sole responsibility of
TR-Electronic GmbH
Eglishalde 6
D - 78647 Trossingen
Tel.: +49 7425/228-0
Fax: +49 7425/228-33
Germany
The following harmonized standards were applied:
EN 61000-6-2:2005/AC:2005
Generic standards - Electromagnetic compatibility,
Immunity (Industrial environments)
EN 61000-6-3:2007/A1:2011
Generic standards - Electromagnetic compatibility,
Emissions (Commercial environments)
Explosive atmospheres
Part 0: Equipment - General requirements
EN IEC 60079-7:2015/A1:2018
Explosive atmospheres
Part 7: Equipment protection by increased safety "e"
Explosive atmospheres
Part 15: Equipment protection by type of protection "n"
Explosive atmospheres
Part 31: Equipment - Dust ignition protection by enclosure “t”
Technical documentation for the assessment of electrical and electronic products
with respect to the restriction of hazardous substances
Other applied standards:
Explosive atmospheres
Part 14: Electrical installations design, selection and erection
Degrees of protection provided by enclosures (IP code)
The products are marked additionally with the following characteristics on the name plate:
II 3G Ex X II 3D Ex X
For adherence of the conformity the references in the Ex User Manual must be observed, especially in the chapters
“Intended use” and “Special conditions for safe use, marking “X””
To Next Page
