Trail Tech VOYAGER PRO User Manual

Vehicle Power
Connect the power cable directly to the vehicle's 12-volt battery.
A 0.5-amp fuse (not provided) should be used.
Voyager Pro can be set to charge always, or to only charge when the engine
is running to protect the vehicle battery.
The best place to tap into vehicle power is usually behind the key switch, so
that power to Voyager Pro is cut when the key is turned off.
AC Adapter Wall Charger
A Trail Tech wall charger can be used to power Voyager Pro indoors.

Trail Tech VOYAGER PRO Specifications

General

Resolution	480 x 272 pixels
Water Resistance	IP67
Micro SD Slot	Yes
Charging	USB
Connectivity	Bluetooth, Wi-Fi
Sensors	GPS, GLONASS, Barometric Altimeter, Thermometer, Accelerometer
Mounting Options	Handlebar
Power Source	Rechargeable battery