Trail Tech VOYAGER PRO User Manual

Can Voyager Pro be turned on and off
manually?
Yes. Hold down the upper left button to power Voyager Pro off.
How do I run Voyager Pro without connecting
it to a vehicle?
Voyager Pro provides an easy way to change unit settings to accommodate a
wide variety of user needs. There are few menu options to change when
Voyager Pro is used without external power:
1. Vehicle Profile > Wake Detection, Speed Source, and Charge Mode
2. Maps and GPS Setup > AutoLog Source
Physical Features Help
There are a few things to know about the outside of Voyager Pro:
1. The four buttons on the case are for Menu/Power/Confirm, Back, Up and
Down.
2. The large button at the top of the dock releases Voyager Pro. The dock
should be mounted securely and wired in.

Trail Tech VOYAGER PRO Specifications

General

Resolution	480 x 272 pixels
Water Resistance	IP67
Micro SD Slot	Yes
Charging	USB
Connectivity	Bluetooth, Wi-Fi
Sensors	GPS, GLONASS, Barometric Altimeter, Thermometer, Accelerometer
Mounting Options	Handlebar
Power Source	Rechargeable battery