- Do not store any flammable materials in the working area or in the immediate vicinity of the
device. Particularly, residues of processed materials have to be removed to prevent any fire
hazard.
- The operator must ensure cleanliness and accessibility at and around the machine by
corresponding instructions and controls.
2.3.2 Responsibilities of the operating personnel
The operating personnel has the following responsibilities.
- Always wear personal protective equipment.
- It is the duty of the operating personnel to check the machine before start of work for
externally visible damage and defects, and to immediately report any changes that appear
(including behavior during operation) that may affect the safety of the machine. It must be
made sure that the machine is operated only in perfect condition.
- The machine must not be left unattended while it is operating (supervised operation).
- Switch off the machine described herein at the main switch for periods of non-use.
- Operate the machine described here only with a lens in place. A missing lens may cause the
unfocused beam to be reflected out of the housing.
- Stop this machine immediately in case of failure.
- No working methods are permitted that affect the safety of persons or of the machine.
- Always keep clean the machine and its components such as lens and mirrors.
To Next Page
Loading...
Need help?
General
