Trotec SP3000 Operation Manual

SP3000
Maintenance
BA 8034_2.4_EN (12/2016) 77 / 87
www.troteclaser.com
9.5 Cleaning the head exhaust
1. Loosen the fixation screw and remove the exhaust hose.
(1 screw)
2. Clean the air flow duct and connection point.
9.6 Cleaning the vent slots of the table exhaust
1. Move the table into a position in which it is easiest for you to clean the slots of the table exhaust
inside the machine.
2. Switch off and disconnect the machine from the mains.
3. Remove the tables.
4. Thoroughly remove all loose dirt particles and deposits in the interior of the machine (e.g. with a
vacuum cleaner or broom).
5. Clean the vent slots of the exhaust box inside the machine using a dry or damp cloth, broom or
vacuum cleaner.
9.7 Cleaning the ultrasonic sensor (Option Sonar Technology™)
The sensor can be cleaned either with a brush, or be wiped drily, with moisture or with mild detergents
and a microfiber or anti-statics cloth. In case of stronger soiling, isopropyl or ethanol solution can be
used.
Avoid long application time and long-term usage.

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English