Trotec SP3000 - Lense placement

SP3000
Operation
62 / 87 BA 8034_2.4_EN (12/2016)
www.troteclaser.com
8.5 Table placement
Damage to the multifunctional base frame or impairment of the exhaust function
When workpieces are processed directly in the multifunctional base frame without a
table, the base frame can be damaged, and impairment of the exhaust function is
possible.
- Process workpieces only on suitable tables.
1. The working area offers space for four tables.
Place the suitable tables on the multifunctional
base frame.
Two person are required for the
placement of a table.
2. Fixate the two outside tables by inserting a
fixation strip at the side.
3. For more details about available table varieties
see chapter "Tables".