Trotec SP3000 Operation Manual

SP3000
Setup and installation
54 / 87 BA 8034_2.4_EN (12/2016)
www.troteclaser.com
7 Setup and installation
7.1 Safety notes
WARNING
Risk of injury
Improper assembly or setup can cause serious injury or damage.
- Work may be carried out only by authorized, trained personnel who are familiar with
how to operate the machine and in strict observance of all safety instructions..
WARNING
Risk of injury
An incomplete, faulty or damaged machine can lead to serious physical injury or property
damage.
- Assemble and install the machine only if the machine and its parts are complete and
intact.
DANGER
Electric current
Work on electrical fittings may be carried out only by qualified personnel and in strict
observance of the safety notes.
Note the following:
 If the system has been subject to significant temperature fluctuations, it must be brought back to
room temperature before being commissioned.
 A laser system consists of high-quality electrical and optical components. Mechanical stresses,
vibrations and impacts must always be avoided
 Ensure that there is sufficient distance to neighboring machines, walls or other fixed equipment.
 Keep the work area orderly and clean.
 Before assembling and installing the machine, check it to make sure it is complete and in good
condition.

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English