SP3000
Operation
58 / 87 BA 8034_2.4_EN (12/2016)
8.3 Power ON/OFF
8.3.1 Power ON
1. Ensure that no objects of any kind are present inside the
processing area that could limit or obstruct the freedom of
movement of the mechanics of the device.
2. Ensure that all safety devices are present and fully
functional and the side panels are closed.
3. Turn on the cooling system by clockwise turning the main
switch located at the back of the system to the right.
4. Switch on the compressed air supply.
5. Turn on the main power of the machine by clockwise
turning the main switch. The main switch is located at the
right front side of the machine
To Next Page
Loading...
Need help?
General
