2.7 In case of an emergency
2.7.1 In case of malfunction
In case of unusual operating states, open the acrylic top lid to stop working process or respectively
press the emergency stop button, if available and switch off the laser device.
When appropriate disconnect the machine from the mains.
Inform laser protection officer and supervisor.
Follow the operating instructions.
Have repair work performed by Trotec service technicians only.
In case of fire: Use only CO
2
extinguisher to quench the fire, insofar as this is possible without
endangering yourself.
2.7.2 In case of accident, First Aid
If due to laser irradiation eye injury has occurred (upon exceedance of the maximum allowable
irradiation rate), the accident victim must immediately be presented to an ophthalmologist.
Assumption of eye injury is justified whenever laser irradiation has occurred and the maximum
allowable irradiation rate may have been exceeded.
First Aider must pay attention to self-protection.
Power off the device.
Remove injured person from the danger zone and provide First Aid. Call emergency physician!
To Next Page
Loading...
Need help?
General
