Trotec SP3000 Operation Manual

SP3000
Operation
BA 8034_2.4_EN (12/2016) 63 / 87
www.troteclaser.com
8.6 Focusing methods
8.6.1 Overview
Precise laser engraving depends on several factors. Apart from the right choice of lens, working tables
and a corresponding exhaust system, correct focusing plays a key role.
The correct setting of the focus, which means the right distance between the laser head and the
material to be engraved, is crucial for a perfect application result.
Manual focus mode
- Focus tool
Automatic focus modes
- Software focus (JobControl
®
)
- Sonar Technology™ (automatic focusing with ultrasonic sensor)
Defects from head crashes (working head hits material or working table) are excluded
from warranty.

Trotec SP3000 Specifications

General

Brand	Trotec
Model	SP3000
Category	Tools
Language	English