5.3 Tables (multifunctional table concept)
5.3.1 Cutting tables
5.3.1.1 Aluminum slat / Acryl slat cutting table
The cutting table with aluminum slats is mainly
used for cutting thicker materials (up to 8 mm
thickness) and for parts wider than 100 mm.
Acrylics can be cut with no reflections by
exchanging the aluminum with acrylic slats.
One can reduce the number of supporting
points by removing slats individually, depending
on the
job.
5.3.1.2 Aluminum cutting grid table
This robust, universal cutting table is
characterized by extremely stable combs and a
long lifetime. It is particularly suitable for cutting
tasks with parts smaller than 100 mm, as these
remain in a flat position after the cut. Compared
to the cutting table the aluminum cutting grid
table has more supporting points.
To Next Page
Loading...
Need help?
General
