SP3000
Setup and installation
56 / 87 BA 8034_2.4_EN (12/2016)
7.4 Connections
7.4.1 Connecting the mains
Wrong voltage can cause damage to the machine
Do not operate the machine, if the voltages do not match, as this may cause damage tot
he machine.
- The mains and operating voltage, as stated next to the connecting sockets must
match.
Connect the end of the mains cable to the main connection socket.
7.4.2 Operating console connection
The connection has to be carried out by a Trotec technician.
7.4.3 Connecting a Trotec exhaust system
Wrong voltage can cause damage to the machine
Do not operate the machine, if the mains voltage does not match the voltage required by
the exhaust system, as this may cause damage tot he machine.
- Make sure that the mains voltage matches the voltage required by the exhaust
system.
The connection has to be carried out by a Trotec technician.
Follow the operation and maintenance instructions in this manual of the exhaust system.
7.4.4 Connecting a Trotec cooling system
Wrong voltage can cause damage to the machine
Do not operate the machine, if the mains voltage does not match the voltage required by
the cooling system, as this may cause damage tot he machine.
- Make sure that the mains voltage matches the voltage required by the cooling
system.
The connection has to be carried out by a Trotec technician.
Follow the operation and maintenance instructions in this manual of the cooling system.
To Next Page
Loading...
Need help?
General
