SP3000
General
BA 8034_2.4_EN (12/2016) 7 / 87
1.2 Explanation of symbols
Important technical safety notes and instructions in this manual are marked with symbols. These
instructions for workplace safety must be complies with and followed. Here special attention must be
paid in order to avoid accidents, injury to persons or material damage.
DANGER
This symbol indicates information noncompliance wherewith result in death or serious
injury.
WARNING
This symbol indicates information noncompliance wherewith may result in death or
serious injury.
WARNING
This symbol warns of potentially dangerous situations related to electric voltage. Failure to
observe the safety instructions leads to risk of serious injury or death. Care is to be taken
in particular during maintenance and repair work.
WARNING
This symbol warns of potentially dangerous situations related to the laser beam. Failure to
observe the safety instructions leads to risk of serious injury.
Material damage
This symbol indicates information noncompliance wherewith may lead to material
damage, functional failures and/or machine breakdown.
Info
This symbol marks tips and information which are to be observed to ensure efficient and
failure-free operation of the machine.
To Next Page
Loading...
Need help?
General
