9.3 Cleaning the machine
1. Move the X-axis into a position in which it is easiest for you to clean the surface and interior of the
machine with a window cleaning agent and paper towels.
2. Switch off and disconnect the machine from the mains.
3. Remove the tables.
4. Thoroughly remove all loose dirt particles and deposits in the interior of the machine (e.g. with a
vacuum cleaner or broom).
5. Clean the vent slots of the exhaust box inside the machine using a dry or damp cloth, broom or
vacuum cleaner.
6. Clean the cover elements and panels using a dry or slightly damp cotton cloth. Do not use paper
towels as they could scratch the acrylic.
To Next Page
Loading...
Need help?
General
