Troxler 3440 - Page 58

5–4
OFFSETS – WET DENSITY
To enable a wet density offset, press 〈1〉 from the display on the previous
page.
The display will be:
Press 〈YES〉 to display:
To change the offset, press 〈YES〉 (pressing 〈NO/CE〉 leaves the factors
unchanged).
The display is:
Select either 〈1〉 or 〈2〉 for the display:
Use the numbered keys to enter a new offset factor. When the entire value
is input, press
〈START/ENTER〉 for the display:
The offset will be stored and the gauge returns to READY.
- W D O ff s et -
Select: + or -
1 = +
2 = -
- W et De nsi ty -
Offset
x.x PCF
W an t to cha ng e?
De ns it y O f fset
DISABLED
Do y ou wa n t to
ENABLE?
- W D O ff s et -
+
Press ENTER
when completed
De ns it y O f fset
ENABLED!