Press 〈START/ENTER〉 to begin taking the measurement. The display
will be:
After counting down to zero, the display will be:
Press 〈START/ENTER〉 to input the sample area wet density obtained
from the alternative test method. The display will be:
Input the material density and press 〈START/ENTER〉. The display will
return to READY.
D
ep
th
:
x
in
ch
es
Time:xxx secs.
Mo
is
t
c
t.
=
xxxx
To input sample
dens Press ENTER
d
en
s
it
y
-
x
.
x
PCF
ENTER
to
ENABLE
To Next Page
Loading...
