OPERATION MODE
The Model 5850v2 provides two modes of gyration. Based on
operator selection, the unit may either compact the specimen for a
set number of gyrations or until the specimen reaches a specified
target height. The default mode of gyration is the number of
gyrations.
To select the gyration mode, press 1 from the Change Settings
menu shown on page 3–4. The compactor displays the Operation
Mode menu shown below.
-Operation Mode-
1- # Gyrations
2- Specimen Height
Press # to Select
Press the numeric key that corresponds to the desired operation
mode. The compactor displays a brief confirmation message, and
then returns to the Change Settings menu.
NUMBER OF GYRATIONS
To enter the number of gyrations for a compaction cycle, press 2
from the Change Settings menu shown on page 3–4. The
compactor displays:
Input Number of
Gyrations
100
Press <ENTER>
Use the number keys to enter the desired number of gyrations (from
1 to 999). Use the NO/CE key to backspace. Press ENTER. The
display returns to the Change Settings menu.
To Next Page
Loading...