XRS2 and SRS2 EID Stick Reader
Issue 5, 03/2018
35
8 Close the case, see page 31.
9 Check that the stick reader operates and place on charge for 3 hours.
10 For instructions on the safe disposal of batteries, see
Disposing of the product and/or the batteries
on
page 23.
Replacing the coin cell battery
1 Open the case, see page 30.
2 Remove and replace the coin cell battery.
3 Close the case, see page 31.
4 For instructions on the safe disposal of batteries, see
Disposing of the product and/or the batteries
on
page 23.
To Next Page
Loading...