TRUE ICE truemfg.com
TEC_TM_171 | REV. G | EN
P#224534
02/28/2024 Page 36 of 72
Installation & Setup (cont.)
Initial Sanitizing
Sanitize the ice machine before use. For sanitizing procedure, please see "Descaling and Sanitizing Procedure" (pg. 60).
DANGER!
HIGHLY CORROSIVE CLEANING CHEMICALS.
AVOID CONTACT WITH EYES AND SKIN.
WEAR EYE PROTECTION AND RUBBER GLOVES WHEN HANDLING.
WARNING!
Toxic material hazard!
DO NOT MIX DESCALER WITH SANITIZER. Harmful fumes may be generated.
Optical radiation hazard! UV light!
Invisible laser radiation. Do not look directly at light. Always disconnect power before servicing the lamp.
USER ACTION!
TRUE recommends using TRUE Ice Machine Descaler. To purchase, contact TRUE Parts Department at 800-424-8783 or
PartsInquiries@TrueMFG.com.
If using a non-True descaler (Nickel-safe) recommended dilution for soaking parts is 3 fl oz (88.7 mL) per 1 gal (3.78 L) and
recommended amount for evaporator cleaning is 6-8 fl oz (177.4-236.6 mL).
Use of non-recommended descaler may void warranty.