TRUE ICE
TEC_TM_171 | REV. G | EN 02/28/2024 Page 65 of 72
truemfg.com
Maintenance & Servicing (cont.)
Preventative Maintenance Descaling and
Sanitizing Procedure
DANGER!
HIGHLY CORROSIVE CLEANING CHEMICALS.
AVOID CONTACT WITH EYES AND SKIN.
WEAR EYE PROTECTION AND RUBBER GLOVES
WHEN HANDLING.
WARNING!
Toxic material hazard!
DO NOT MIX DESCALER WITH SANITIZER. Harmful
fumes may be generated.
Optical radiation hazard! UV light!
Invisible laser radiation. Do not look directly at
light. Always disconnect power before servicing
the lamp.
USER ACTION!
TRUE recommends using TRUE Ice Machine
Descaler. To purchase, contact TRUE Parts
Department at 800-424-8783 or
PartsInquiries@TrueMFG.com.
If using a non-True descaler (Nickel-safe)
recommended dilution for soaking parts is 3 fl
oz (88.7 mL) per 1 gal (3.78 L) and recommended
amount for evaporator cleaning is 6-8 fl oz
(177.4-236.6 mL).
Use of non-recommended descaler may void
warranty.
1. Loosen the front panel screws and open the front panel.
2. In the home screen, press CLEAN .
3. Press BOTH.
4. Press PREVENTATIVE MAINT.
To Next Page
Loading...
Need help?
General
