6
1.5 Media Specifications
Continuous, black mark, partial label with gap (liner is
transparent and can be detectable by reflective sensor) &
selected liner free label
25.4 mm (1”) ~ 2,794 mm (110”)
Tear mode: 50 mm (1.97”) ~ max. print length
Max. 58 mm (includes liner)
Black mark: min.8 mm (w) x 2 mm (h)
0.06 mm (2 mil) ~ 0.10 mm (3.94 mil)
Note: Please locate the black mark on the printing side when using black mark continuous label.
To Next Page
Loading...
Need help?
General
