17
3.2.2 Charge by 4-bay Battery Charger Station (Optional)
1. Plug the power cord to the power
jack on the charger station.
2. Insert the printer along the slot to
the charger station as pictured.
Note:
Please refer to section 3.1 for battery
installation procedure.
3. Push the battery clasp and
properly install the battery
4. Plug the power cord into a
properly power outlet then turn on
the power switch. It will start
charging.
Note:
The battery is completely charged
and the amber of LED indicator will
be off and turns to green.
To Next Page
Loading...
