TSC TDM-20 - Setting Wi-Fi by Printer Management (Optional)

42
6.4 Setting Wi-Fi by Printer Management (Optional)
1. Make sure the media is already installed and media cover is closed. (Please refer
to section 3.4)
2. Connect the USB cable between the computer and the printer.
3. Turn on the printer power.
4. Start the Printer Management by double clicking on the icon.
5. Select the printer in the list then click the “Printer Configuration” button to enter the
setting page.
6. Select the “Wi-Fi” tab to setup the wireless module.
 WPA-Personal
1
2
2
3
1