TSC TDM-20 - Page 24

14
2. Charging the battery when the printer turns off.
Charging cycle
LED version
Charging the battery when the
printer turns off.
Charging level: 0~30%
Charging level: 30~60%
Charging level: 60~100%
Charging level: 100%
Note:
1. Printer status LED blinks amber light when charging the battery.
2. Push any button when charging the battery, the LED lights will shows the charging status.
3. After the battery was fully charged and stopped print job for a while, the printer will
automatically turn-off.