5.7 Cleaning the Print Head
The printer should be cleaned at regular intervals to retain high quality and
optimum performance. The greater the usage of the printer, the more frequent
the cleaning.
1. Always turn off the printer before cleaning the print head. Allow the
printhead to cool for a minimum of one minute.
2. Open the printer cover.
3. Open the printer carriage by pulling up the release lever on the left side of
the front rubber roller.
4. Remove the ribbon and label.
5. Clean the print had element with a head cleaner pen or use a cotton swab
and 100% ethanol to clean the print head surface.
Note:
* Do not touch printer head by hand. If you touch it careless, please use
ethanol to clean it.
* It’s industry alcohol. Please do not use regular alcohol, which may
damage the printer head.
To Next Page
Loading...
